Connecting The Battery - Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual

4.01

CONNECTING THE BATTERY

A battery can be connected on the board using the jumper W40:
. an Internal Battery is set with pins 1-2 shorted
. an External Battery is set with pins 2-3 shorted
Please refer to Table 4-1e to set W40.
Removing the W40 jumper has the same effect as putting the battery in storage; TEKNOR
always ships its board with the battery jumper removed in order to increase the life of the
battery.
Setting Jumpers 4-3