Table of Contents
Advertisement
10.02 AMIBIOS SETUP PROGRAM
10.02.1 ACCESSING AMIBIOS SETUP PROGRAM
The VIPer807 uses the AMIBIOS Setup program, a setup utility in ROM to configure data
in CMOS RAM.
The system BIOS (Basic Input Output System) provides an interface between the
operating system and the hardware of the VIPer807 single-board computer. This interface
is 100% IBM AT compatible: All functions accept similar inputs as IBM and provide the
same results, although the program code itself is different.
To run the AMIBIOS Setup program:
•
Power on or reboot the system.
•
Hit the DELETE key before or when the message - "Hit <DEL> if you want to run
SETUP" appears.
DELETE will work, even if the message display is disabled in AMIBIOS SETUP.
•
The AMIBIOS main menu appears as follows:
VIPer Software Setups
10-4
Advertisement
Table of Contents
