Table of Contents
Advertisement
PCI-934 Technical Reference Manual
13.2 SAVING CONFIGURATIONS & EXITING AWARD SETUP
Use one of the following options available from the Main Menu:
Save & Exit
Use this option to save the configuration in CMOS RAM. Value
changes are not saved in the Flash EPROM. To update the Flash
memory, use the 'BIOS Setup Feature/Save CMOS in Flash' option.
Exit Without
Use this option to exit AWARD Setup without saving the
Saving
configuration to CMOS RAM.
13.3 STANDARD CMOS SETUP
This part of the setup allows you to set the time, date, hard disk type, types of floppy drives
and video type.
Date/Time
Setup date and time values through the keyboard.
Hard Disks
Two IDE controllers are defined: Primary and Secondary. Each
can support two disks: Master Disk (bootable) or Slave Disk.
Drive A / Drive B
Identifies floppy disk types (drive A or B) connected to the board.
Video
Specifies the type of the display adapter card installed in the
system.
CRT & LCD
Use this option to select within CRT display mode only, Flat panel
mode only, or both CRT and flat panel display.
Halt on
This option specifies the type of errors that will stop the system
during the BIOS booting procedure. Settings are All errors, No
errors, All but keyboard (default setting), All but diskette and All
but disk/key.
Memory
This option summarizes the amount of Base, Extended and other
types of memory installed in the system.
13-4
Advertisement
Table of Contents
