12.06.1
BATCH MODE COMMAND LINE PARAMETERS
The command line format is as follows:
VFLASH [drive:] [\directory] [destination] [options]
where:
[drive:]
is the source drive from which a complete copy will be made if no
directory is specified (see section 12.04 for more information).
[\directory]
is the path used to show from which directory the source files will be
taken and transferred to the Flash or EPROM files. If you do not specify
a directory (for example, VFLASH B:\), only the files in the root
directory will be transferred to the Flash disk. Also, if the Flash disk is
to be bootable, the /B option must be used.
VFLASH Software
12-21