Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual page 179

INTERFACE CONNECTORS
The following connectors are recommended for interfacing with the I/O devices. The
parts shown here do not have a strain relief but one may be added.
Connector
Fan Connector (J1)
SCSI (J2)
Hard Disks (J3 & J8)
Floppy Disk (J4)
Multi-Function (J5)
Serial Ports 1 & 2 (J6 & J7) Amp 746285-1 [499252-5*],
* optional strain relief part number shown in square brackets
Appendices 18-16
Recommended Mating Part
Leoco 2530 S020013 (housing),
Leoco 2533 TCB00A0 (crimp);
Molex 22-01-3027 (housing),
Molex 08-50-0114 (crimp).
Robinson Nugent IDS-C50PK-TG,
Amp 1-746285-0 [499252-4*],
Thomas & Betts 622-5030 [622-5041*].
(50-pin flat cable connector).
Amp 746285-9 [499252-1*],
Robinson Nugent IDS-C40PK-TG,
Thomas & Betts 622-4030 [622-4041*].
(40-pin flat cable connector).
Amp 746285-8 [499252-6*],
Robinson Nugent IDS-C34PK-TG,
Thomas & Betts 622-3430 [622-3441*].
(34-pin flat cable connector).
Amp 746285-3 [499252-8*],
Robinson Nugent IDS-C16PK-TG,
Thomas & Betts 622-1630 [622-1641*].
(16-pin flat cable connector).
Robinson Nugent IDS-C10PK-TG,
Thomas & Betts 622-1030 [622-1041*].
(10-pin flat cable connector).