8.03.3 REMOVABLE TERMINATION RESISTORS
The TEK-AT4LVG has three termination resistors around the SCSI controller labeled
RN12, RN21 and RN22 on the board. These red-colored resistors are removable. It is
recommended that you remove them if your board is not located at the end of the SCSI
cable.
F F
RN12, RN21 and RN22 Termination Resistors should be removed when your
board is not connected at either end of the SCSI cable.
Installing IDE, Floppy & SCSI Devices
8-17