Power Management; Vt100 And Download Modes - Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual

2.01.7 POWER MANAGEMENT

• Supports Stand-by and Suspend modes for the System Power Management.
S - •
TAND BY
S •
USPEND
• Supports Stand-by mode for the Hard Disk Power Management.
S - •
TAND BY

2.01.8 VT100 AND DOWNLOAD MODES

VT100 M •
ODE
D M •
OWNLOAD ODE
Product Specifications
System Controller's first level of power management. In this
mode, the CPU clock frequency is reduced.
Also, if the VIDEO ON/OFF CONTROL is enabled, the
video monitor will be deactivated.
System Controller's second level of power management. In
this mode, the CPU clock frequency is stopped.
In this mode, the Hard Disk is powered off. It is reactivated by
the next disk access operation.
Enables your single board computer to run without a local
keyboard or screen. That is, operation can be controlled via a
remote terminal supporting VT100 Mode or a computer with a
terminal emulation program.
Information can be downloaded to the Flash EPROM disk on
the board by running VFLASH on a remote computer and using
a serial link.
2-8