Ide/Floppy/Scsi Devices; Serial And Parallel Ports; Serial And Parallel Ports - Teknor Industrial Computers TEK-AT4LVG Technical Reference Manual

2.01.3 IDE/FLOPPY/SCSI DEVICES

F D •
LOPPY ISKS
•
IDE (H D ) •
ARD ISKS
•
SCSI •
•
•
•
•
•

2.01.4 SERIAL AND PARALLEL PORTS

S P •
ERIAL ORTS
•
•
•
P P •
ARALLEL ORTS
•
Software compatible with N82077.
Enhanced super Floppy controller which supports two Floppy
disk drives of up to 2.88MB each, 16 bytes of FIFO buffering
and a 48 mA drive buffer.
Includes a local bus IDE hard disk interface for a high
performance disk subsystem.
Support for two IDE channels for up to four IDE drives.
Adaptec AIC-6360 supports up to seven SCSI peripherals
and the Fast SCSI II standard.
Passive Terminations.
Fast SCSI II, 8-bit bus.
10MB/s synchronous transfers.
5MB/s asynchronous transfers.
Can co-exist with other hard disk/controller combinations:
such as ST-506, RLL, ESDI and IDE.
Two 16550 compatible serial ports with internal 16-byte
FIFO buffers can be defined as two of the following: COM1,
COM2, COM3 or COM4.
Serial Port 1 is configurable as RS-232.
Serial Port 2 is configurable as RS-232 or RS-485.
Support for VT100 mode through Serial Port 1 or 2.
One bi-directional port (LPT1).
Multi-mode parallel port supporting the following modes:
- Standard Parallel Port (SPP): This mode is IBM XT/AT
compatible and PS/2 compatible (bi-directional);
- Enhanced Parallel Port (EPP);
- Extended Capabilities Port (ECP).
Product Specifications 2-5