Lower Housing And Printer Mechanism; Removing The Printer Cover; Handling The Printer Mechanism - Epson Stylus Photo R1800 Service Manual

EPSON Stylus Photo R1800/R2400
8. Lift the Upper Housing in the direction of the arrows, pull the Guide Pin on
the Upper Housing away from the notch on the printer cover, and remove
the Printer Cover.
Upper Housing
Guide Pin on the Upper Housing
Figure 4-10. Removing the Printer Cover
Disassembly And Assembly
Printer Cover
Notch on the Printer Cover
Disassembly

4.2.1.5 Lower Housing and Printer Mechanism

1. Remove the Upper Housing.
2. Grip both ends of the two Ink Tube Fasteners with your fingers, slide them
in the direction of the arrows, and draw out the Waste Ink Tubes from the
two Ink Tubes.
3. Remove the four C.B.P. M3 x 10 screws and two C.B.S. (P2) M3 x 10
screws that secure the Printer Mechanism.
If you hold the Printer Mechanism at locations other than the
C A U T I O N
handling positions when performing the following
procedure, the frame might become deformed. Be sure to
hold the Printer Mechanism by the positions.
Figure 4-11. Handling the Printer Mechanism
4. Hold the Printer Mechanism by its handling positions with both hands, and
remove it from the Lower Housing.
Revision B
See Section 4.2.1.4 on page 76.
Handling Positions
78