List Of Warning Messages - Epson Stylus Photo R1800 Service Manual

EPSON Stylus Photo R1800/R2400
Table 5-7. List of Error Messages
Error
Preparing printer The printer is not ready. Check the printer status.
Out of paper error There is no paper loaded. Load a paper.
Paper jam error A paper jam has occurred. Start from the printing again.
Print error An error occurred while printing. Check the printer status.
Undefined file read Reading the required files has failed. Copy the program
error folder again.
Insufficient memory Insufficient memory. Exit all applications that are currently
error active.
Log file output error Failed to output a log file. To continue the process, click
[OK].
Calibrator plug-in read Failed to read the plug-in. Copy the program folder again.
error
Calibrator parameter A parameter error of the calibrator occurred. Check if the
error calibrator is Eye-One calibrator with a UV filter.
Calibrator Communication with the calibrator failed. Check the
communication error calibrator's connection status.
Calibrator calibration The calibration has failed. Put the Eye-One calibrator on
error (retry) the calibration plate and click [Retry] to recalibrate.
Calibrator calibration The calibration has failed. Check the calibrator status.
error (failed 3 times)
Color measurement Color measuring of the Eye-One calibrator has failed.
failure Measure colors of the failed row again.
Head ID read error Failed to read the Head ID. Check the printer status.
Color ID mismatch The Color ID does not match the printer. Check the printer
error status.
Color ID enable flag The Color ID enable flag has become invalid. Check the
invalid error printer status.
Color ID read error Failed to read the Color ID. Check the printer status.
Multiple data file error There are multiple data files in the start-up folder. Copy
the provided program folders again.
Unknown error An error of unknown origin occurred.
Adjustment
Message
Adjustment
Table 5-7. List of Error Messages
Error
Printer offline The printer is off-line. Place the printer online.
Ink Out Error The remaining amount of the following ink(s) is low.
Replace the corresponding ink cartridge(s) with a new one
and retry this wizard.
XXXXX, XXXXX
Table 5-8. List of Warning Messages
Error
USB ID mismatch The USB ID is different. The connected printer may be
different from the one that printed the chart. Are you sure
you want to continue?
Color measurement There is a patch(s) that could not be measured properly.
re-confirmation Perform the color measuring again.
warning
Revision B
Message
Message
164