Removing The Belt Holder; Removing The Cr Encoder Board Holder; Removing The Sensor Ffc - Epson Stylus Photo R1800 Service Manual

EPSON Stylus Photo R1800/R2400
23. Turn the Belt Holder Mounting Plate in the direction of the arrow, and
remove it from the Carriage Unit.
Belt Holder Mounting Plate
Figure 4-71. Removing the Belt Holder (1)
24. Remove the Belt Holder from the Carriage unit.
Figure 4-72. Removing the Belt Holder (2)
Disassembly And Assembly
Belt Holder
Disassembly
25. Release the CR Encoder Board Holder from the three Tabs to remove it
from the Carriage Unit.
CR Encoder Board Holder
Figure 4-73. Removing the CR Encoder Board Holder
26. Disconnect the Sensor FFC from the Connector on the CSIC Board.
Sensor FFC
Figure 4-74. Removing the Sensor FFC
Revision B
Tabs
101