Entering The Color Id Workflow; Entering Data - Epson Stylus Photo R1800 Service Manual

EPSON Stylus Photo R1800/R2400
3. Repair work site
1. Start up the Colorimetric Calibration Tool for Stylus Photo
R1800 on a PC, and click [Input the Color ID].
Figure 5-49. Entering the Color ID
The following shows the process when [Input the Color ID] is clicked.
Connect printer
Check printer connection
Enter data
Write Color ID
Figure 5-50. Entering the Color ID Workflow
Adjustment
Select port
END
2. Execute
Step 2 ~ 3
Place the Same as the Repair Work Site"
printer to the PC.
3. Select either of "File" or "Manual input" in "Input method" box,
and input the color measurement data.
•
When "File" is selected as Input method
When "File" is selected as Input method, and the color
measurement data file is selected, the content of the file is reflected
in the "Color ID" and the "USB ID" edit boxes.
•
When "Manual input" is selected as Input method
Select "Manual input" at Input method, and directly enter the
numerical values in the "Color ID" and the "USB ID" edit boxes.
To enter numerical values, start up the correction value data file
confirmation tool (CCAS Data Viewer), open the color
measurement data file, check the Color ID at "Color ID" edit box
and enter the numerical values.
Adjustment
of the procedure
" When Measuring Color at a
(p150) to connect the
When "File" is selected
When "Manual input"
is selected
This button is enabled
when "File" is selected or
when all of the data is input
in the "Color ID" and the
"USB ID" edit boxes (when
"Manual" is selected).
Figure 5-51. Entering Data
Revision B
161