Disassembly - Epson Stylus Photo R1800 Service Manual

EPSON Stylus Photo R1800/R2400

4.2 Disassembly

The flowchart below lists the step-by-step disassembly procedures. When disassembling each unit, refer to the page number shown in the figure.
START
"Rear Housing"
4.2.1.1 page 74.
"Side Housing" "Board Assy"
4.2.1.2 page 74. 4.2.5.1 page 87.
"Upper Housing"
4.2.1.4 page 76.
"Lower Housing and
"LED Board"
Printer Mechanism"
4.2.5.2 page 89.
4.2.1.5 page 78.
"Paper EJ Frame
"Waste Ink Pad"
Assy."
4.2.2 page 80.
4.2.6.6 page 105.
"CD-R Release "Front Paper Guide
Lever Sub Assy" and Paper eject roller"
4.2.6.7 page 106. 4.2.6.12 page 116.
"PF Encoder
"Ink System Unit"
Sensor Holder"
4.2.6.8 page 109.
4.2.8.4 page 126.
"Upper Paper
Guide Assys."
4.2.6.11 page 114.
"PF Roller Shaft"
4.2.6.13 page 119.
Disassembly And Assembly
"CR Scale" "APG Assy"
4.2.6.2 page 91. 4.2.6.3 page 93.
"Front Paper
"PF Motor"
Guide Pad"
4.2.7.2 page 123. 4.2.6.3 page 93.
4.2.3 page 82.
"Release Holder
4.2.6.9 page 112.
"FLAG Release
4.2.6.10 page 113.
4.2.8.1 page 124.
"Upper Paper
Guide Assys."
4.2.6.11 page 114.
Figure 4-1. Disassembly Flowchart
"ASF Assy" "CSIC Board" "Print Head"
4.2.4 page 83. 4.2.6.5 page 103. 4.2.6.1 page 89.
"PE Sensor
"APG Assy"
Holder"
4.2.6.2 page 91.
4.2.8.1 page 124.
"LED Board"
Assy"
4.2.5.2 page 89.
"APG Assy"
Assy."
4.2.6.3 page 93.
"PE Sensor "Carriage Shaft
Holder" and Carriage Unit"
4.2.6.4 page 95.
"Ink Mark Sensor
and PW sensor"
4.2.8.2 page 125.
Disassembly
The step for the unit or discrete part within the broken line
is not the shortest removal step but is the step necessary
for removing the next unit or discrete part.
"Paper EJ Frame
"CR Motor"
Assy."
4.2.7.1 page 122.
4.2.6.6 page 105.
"CR Scale"
"CR Encoder
Sensor Board"
4.2.8.3 page 126.
Revision B
"PF Encoder
Sensor Holder"
4.2.8.4 page 126.
73