Epson Stylus Photo R1800 Service Manual page 218

EPSON Stylus Photo R1800/R2400
Occurrence
Phenomenon Detail
Timing
At power-on At power-on, the CR Motor
does not operate at all.
Stylus Photo R2400
Table 8-16. Troubleshooting of Fatal Error
Faulty Part/
Part Name
CR Motor 1. Check that the CR Motor connector cable is connected to
the Relay Connector.
CR Motor
Relay Connector
2. Check the CR Motor connector cable for damages.
3. Check if the CR Motor operates normally.
Relay 1. Check that the Relay Connector Cable is connected to the
Connector Main Board Connector CN15.
Cables
(for the CR
Motor)
2. Check the Relay Connector Cable for damages.
Overview
Check Point
CN15
Revision B
Remedy
1. Connect the CR Motor connector to the
Relay Connector.
2. Replace the CR Motor with a new one.
3. Replace the CR Motor with a new one.
1. Connect the Relay Connector Cable to the
Main Board Connector CN15.
2. Replace the Relay Connector Cable with a
new one.
218