Printer Mechanism/Housing, Lower Removal - Epson Stylus Photo R220 Service Manual

EPSON Stylus Photo R220/R230

2.3.12 Printer Mechanism/Housing, Lower Removal

External View
C.B. 3x6 (5-7kgf.cm)
2 1 3
C.B.P. 3x8 (5-7kgf.cm) Paper Guide, CDR
2
Screw, Frame, Main (6-8kgf.cm)
Left Side of the Printer
Tab
Figure 2-32. Printer Mechanism/Housing, Lower Removal
DISASSEMBLY / ASSEMBLY
C.B.S. 3x6 (6-8kgf.cm)
C.B.P. 3x10 (6-8kgf.cm)
5
C.B.P. 3x10 (6-8kgf.cm)
1
Tab (Under the Tube)
Right Side of the Printer
Tab
Parts/Units which should be removed before removing the Printer
Mechanism/Housing, Lower.
Paper Support Assy./Housing (left/right)/Housing, Frame/ASF Assy./
Holder, Shaft Assy./Main Board Assy.
Disassembly Procedure
4
1. Remove the three screws that secure the Paper Guide, CDR.
2. Remove the five screws that secure the Printer Mechanism to the Housing,
Lower.
3. Release the four tabs that secure the Printer Mechanism to the Housing, Lower
and remove the Printer Mechanism upward.
3
Tab
Disassembly
Revision A
69