Rotating The Left Parallelism Adjust Bushing; Rotating The Left Cr Shaft Mounting Plate; Removing The Carriage Shaft Spacer; Removing The Left Cr Shaft Mounting Plate - Epson Stylus Photo R1800 Service Manual

EPSON Stylus Photo R1800/R2400
14. Loosen the C.B.S. (P4) M3 x 8 screw that secures the Left Parallelism
Adjust Bushing, and rotate the Bushing toward the front of the Printer
Mechanism to prevent interference between the Flag of the Parallelism
Adjust Bushing and the Left PG Cam.
Flag of the Parallelism Adjust Bushing (Left)
Left PG Cam
Figure 4-59. Rotating the Left Parallelism Adjust Bushing
15. Slide the Left CR Shaft Mounting Plate upwards, and release the Tab on
the Left CR Shaft Mounting Plate from the notch on the Main Frame to
rotate the Mounting Plate toward you.
Tab
Figure 4-60. Rotating the Left CR Shaft Mounting Plate
Disassembly And Assembly
6) C.B.S. (P4) 3x8
(5±1 kgf.cm)
Left CR Shaft
Mounting Plate
16. Lift the Carriage Shaft upwards, and remove the Carriage Shaft Spacer
from the Carriage Shaft with tweezers.
Figure 4-61. Removing the Carriage Shaft Spacer
17. Rotate the Left CR Shaft Mounting Plate toward you to remove the
Bushing on the Left CR Shaft Mounting Plate from the Carriage Shaft.
Figure 4-62. Removing the Left CR Shaft Mounting Plate
Disassembly
Carriage Shaft Spacer
Carriage
Shaft
Bushing
Left CR Shaft
Mounting Plate
Revision B
98