Epson Stylus Photo R1800 Service Manual page 43

EPSON Stylus Photo R1800/R2400
Occurrence
Phenomenon Detail
Timing
The Paper Switch The CD-R Tray moves toward
was pressed at the the ASF and the posterior
setting of the CD-R edge of it reaches to the
Tray or board Driven Roller on the Upper
paper Paper Guide.Then the CD-R
Tray tries to go farther, but it is
ejected.
Troubleshooting
Table 3-4. Troubleshooting of Paper Out Error
Faulty Part/
Part Name
PW sensor 1. Check that the PW Sensor FFC is placed in the specified
routing positions and does not make contact with any
parts.
CR Encoder Board
Connector
2. Check that the PW Sensor FFC is connected to the CR
Encoder Board and PW Sensor Connectors. Refer to the
above photo.
3. Check the PW Sensor or PW Sensor FFC for damages.
Overview
Check Point
PW Sensor
Connector
FFC
Revision B
Remedy
1. Place the PW Sensor FFC in the specified
routing positions.
2. Connect the FFC to the CR Encoder Board
and PW Sensor Connectors.
3. Replace the PW Sensor with a new one.
43