Epson Stylus Photo R1800 Service Manual page 212

EPSON Stylus Photo R1800/R2400
Occurrence
Phenomenon Detail
Timing
At operation At the time of paper ejection,
the PF Roller advances the
paper but cannot eject it
completely.
Paper is not ejected
completely and causes a jam
near the Paper Eject Frame.
Stylus Photo R2400
Table 8-9. Troubleshooting of Paper Jam Error
Faulty Part/
Part Name
– 1. Check that the size of the fed paper is not larger than that
of the paper specified by the driver.
ASF Assy. 1. Check that the paper is fed along the Right Edge Guide.
Paper EJ Frame 1. Check that the Star Wheel Units have not come off the
Assy. Paper EJ Frame Assy.
Paper EJ Frame Assy.
2. Check the Paper EJ Frame Assy for deformation or
damages.
Spur Gear 68 1. Check the Spur Gear 68 or Spur Gear 16; B for damages. 1. Replace the Front (or Rear) Paper EJ
Spur Gear 16; B
Paper EJ Roller Spur Gear 16; B
Assy.(front/rear)
Spur Gear 68
Overview
Check Point
Star Wheel Units
Revision B
Remedy
1. Tell the user that the paper size specified
by the driver is not available for the printer.
1. Feed the paper along the Right Edge
Guide.
1. Securely install the Star Wheel Units to the
Paper EJ Frame Assy.
2. Replace the Paper EJ Frame Assy with a
new one.
Roller Assy with a new one.
212