Troubleshooting Of Paper Mismatch Error; Troubleshooting Of Ink Low; Troubleshooting Of Ink Out Error - Epson Stylus Photo R1800 Service Manual

EPSON Stylus Photo R1800/R2400
Occurrence
Phenomenon Detail
Timing
At operation When feeding a CD-R (Board
Paper), an error is displayed
on the LED and EPW3.
Occurrence
Phenomenon Detail
Timing
At operation or A message is displayed on
during printing the LED and EPW3 during
printing.
Occurrence
Phenomenon Detail
Timing
During printing After the Carriage has
detected the HP, an error is
displayed on the LED and
EPW3.
Troubleshooting
Table 3-7. Troubleshooting of Paper Mismatch Error
Faulty Part/Part
Name
Paper EJ Frame 1. Check if the CD-R Tray Base is closed or not.
Assy
(CD-R Tray Base)
CD-R Sensor 1. Check that the Connector cable of the CD-R Sensor is
securely connected to the connectors of the CD-R Sensor
and Panel Board.
CD-R Sensor
Connector cable of
the CD-R Sensor
2. Check the CD-R Sensor or Connector cable for damages. 2. Replace the CD-R Sensor with a new one.
Table 3-8. Troubleshooting of Ink Low
Faulty Part/Part
Name
Ink Cartridge 1. Look at the remaining ink indication of the EPW3 to check
the amount of the ink remaining in the Ink Cartridge.
Table 3-9. Troubleshooting of Ink Out Error
Faulty Part/Part
Name
Ink Cartridge 1. Look at the remaining ink indication of the EPW3 to check
whether the ink remains in the Ink Cartridge.
Overview
Check Point
Panel Board connector
Check Point
Check Point
Revision B
Remedy
1. Open the CD-R Tray Base.
1. Connect the Connector cable of the CD-R
Sensor to the CD-R Sensor and Panel
Board Connectors.
Remedy
1. Prepare a new Ink Cartridge.
Remedy
1. Replace the Ink Cartridge with a new one.
46