Rotating The Left Bushing 8; Handling The Pf Roller Shaft - Epson Stylus Photo R1800 Service Manual

EPSON Stylus Photo R1800/R2400
8. Remove the Guide Pin of Left Bushing 8 from the Main Frame using
tweezers, and rotate the Bushing upwards to align with the notch on the
Main Frame.
Notch
Left Bushing 8
Figure 4-125. Rotating the Left Bushing 8
When performing the following procedure, take care not to
C A U T I O N
lose the E-ring.
9. Remove the E-ring from the PF Roller Shaft with a flat-blade screwdriver,
and slide Left Bushing 8 to the inside of the Printer Mechanism.
Figure 4-126. Removing the Left Bushing 8
Disassembly And Assembly
Guide pin
E-Ring
PF Roller Shaft
Disassembly
When performing the following procedure, pay attention to
C A U T I O N
the following points.
Prevent the coated surface of the PF Roller Shaft from
being scratched.
Do not touch the coated surface of the PF Roller Shaft
with bare hands.
Figure 4-127. Handling the PF Roller Shaft
Revision B
Coating Part
120