Lubrication; Grease Applied To The Stylus Photo R800 - Epson Stylus Photo R1800 Service Manual

EPSON Stylus Photo R1800/R2400

6.1.4 Lubrication

The lubrication used for the components of the printer has been decided on
based on evaluation carried out by Epson. Therefore, the specified amount and
places of lubrication given in this section should be strictly observed.
Never use oil or grease other than those specified in this
C A U T I O N
manual. Use of different types of oil or grease may
damage the components or affect the printer functions.
Never apply a larger amount of oil or grease than
specified in this manual.
Table 6-1. Grease Applied to the Stylus Photo R800
Type Name
Grease G-26
Grease G-45
Grease G-71
Maintenance
EPSON CODE Supplier
1080614 EPSON
1033657 EPSON
1304682 EPSON
Overview
Adjust Parallel Bushing (Right)
Right Side Face
Adjust Parallel Bushing (Left)
Left Side Face
Figure 6-2. Lubrication (1)
Left Side Right Side
Figure 6-3. Lubrication (2)
Revision B
<Lubrication Point>
Left and Right Adjust Parallel
Bushings (outer circumference)
<Lubrication Type>
G-26
<Lubrication Amount>
φ
1mm x 2mm
<Remarks>
• Apply with a syringe.
φ
(Pin Head: 1mm)
• After lubrication, install and turn
the PG Cam Bush to spread the
grease evenly.
<Lubrication Point>
Contact point of the CR Scale
Mounting Plate (Left/Right) and the
Main Frame
<Lubrication Type>
G-26
<Lubrication Amount>
Apply evenly.
<Remarks>
Apply with a brush.
175