Paper Exit
To the Duplex Unit
When the duplex mode is selected, junction gate 1 [A] closes the paper path to the
standard tray. The junction gate 2 [B] always closes the path to the optional unit, which is
only used in the Japanese model. In this model, the junction gate 2 is not used (Japan only).
The paper transport roller [C] is driven by the fusing/paper exit motor [D]. The junction gate
jam sensor [E] in the path between the fusing unit and the duplex unit. The duplex entrance
sensor [F] detects paper jams in the path to the duplex unit.
SM
6-75
G133