Ricoh G133 Service Manual page 419

Separation DC: Thick 1: 2nd
006
Page
007 Separation DC: Fine: 1st Page
008 Separation DC: Fine: 2nd Page
[Thick 1: L Edge: Timing]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2522
plate at the paper leading edge between the erase margin area and the image
area.
Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
Paper Transfer: Thick 1: 1st
001
Side
Paper Transfer: Thick 1: 2nd
002
Side
003 Paper Transfer: FINE: 1st Side
004 Paper Transfer: FINE: 2nd Side
Separation DC: Thick 1: 1st
005
Page
Separation DC: Thick 1: 2nd
006
Page
007 Separation DC: Fine: 1st Page
008 Separation DC: Fine: 2nd Page
[Thick 1: Trailing Edge Correction] Thick 1 Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the
2523
paper trailing edge in each mode. SP2502 and SP2507 are multiplied by these
SP values.
Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
SM
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 30 / 0 / 1 mm/step]
*ENG
*ENG
[0 to 30 / 0 / 1 mm/step]
*ENG
*ENG
[0 to 30 / 0 / 1 mm/step]
*ENG
*ENG
[0 to 30 / 0 / 1 mm/step]
*ENG
5-97
Service Mode Table
G133