Ricoh G133 Service Manual page 328

Service Mode Table
1001 004 Bit Switch 4
1001 005 Bit Switch 5
1001 006 Bit Switch 6
1001 007 Bit Switch 7
1001 008 Bit Switch 8
1003 [Clear Setting]
1003 001 Initialize System
1003 003 Delete Program
1004 [Print Summary]
G133
Bit 5 to 7: Not used. Do not change the
settings.
*CTL Adjusts bit switch settings. DFU
Bit 0 to 2: Not used. Do not change the
settings.
Bit 3: Enables the "%%" command of the
PostScript detection condition for the auto print
*CTL language selection function.
0: Enabled
1: Disabled
Bit 4 to 7: Not used. Do not change the
settings.
*CTL
Adjusts bit switch settings. DFU
*CTL
*CTL
Initializes settings in the System menu of the
-
user mode.
-
DFU
5-6
GW products go to alert
status and wait for the user to
take action.)
1: HP/SV products (If a tray is
selected using PCL5e
commands and it has paper,
HP/SV products search for
another tray that has the
same paper size/type.)
SM