Ricoh G133 Service Manual page 368

Service Mode Table
Front, Center, Rear: ID sensors for the automatic line position adjustment
001 Maximum 2: Bk
002 Maximum 2: M
003 Maximum 2: C
004 Maximum 2: Y
005 Maximum 2: Front
006 Maximum 2: Center
007 Maximum 2: Rear
[ID Sensor Check Result] DFU
Displays the minimum result 2 values of the ID sensor check.
2145
Bk, M, C, Y: ID sensors for the process control
Front, Center, Rear: ID sensors for the automatic line position adjustment
001 Minimum 2: Bk
002 Minimum 2: M
003 Minimum 2: C
004 Minimum 2: Y
005 Minimum 2: Front
006 Minimum 2: Center
007 Minimum 2: Rear
[Area Mag. Correction] LD Pulse Area Correction (Area, Color) FA
Adjusts the magnification for each area. The main scan (297 mm) is divided
2150
into 8 areas. Area 1 is at the front side of the machine (left side of the image)
and area 8 is at the rear side of the machine (right side of the image).
Decreasing a value makes the image shift to the left side on the print.
G133
*ENG
*ENG
*ENG
[0 to 5.5 / 0 / 0.01V/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[0 to 5.5 / 0 / 0.01V/step]
*ENG
*ENG
*ENG
*ENG
5-46 SM