Ricoh G133 Service Manual page 380

Service Mode Table
001 M Magnification
002 C Magnification
003 Y Magnification
Adjusts the main scan registration for each color and speed.
Decreasing a value makes the image shift to the left side on the print.
Increasing a value makes the image shift to the right side on the print.
004-021
1 dot = 21μm, 1 pulse = 1.3μm
Dot: Rough adjustment, Subdot: Fine adjustment. Adjust 'dot' first, then adjust
'subdot'.
004 M. Scan: High: Dot: M
005 M. Scan: High: Subdot: M
006 M. Scan: Medium: Dot: M
M. Scan: Medium: Subdot:
007
M
008 M. Scan: Low: Dot: M
009 M. Scan: Low: Subdot: M
010 M. Scan: High: Dot: C
011 M. Scan: High: Subdot: C
012 M. Scan: Medium: Dot: C
M. Scan: Medium: Subdot:
013
C
014 M. Scan: Low: Dot: C
015 M. Scan: Low: Subdot: C
G133
*ENG Adjusts the line position manually.
[-1 to 1 / 0 / 0.001%/step]
*ENG
When line shifts are not corrected by the
automatic line position adjustment, do this
SP.
Increasing a value reduces the image in the
*ENG
main scan direction.
Decreasing a value enlarges the image in
the main scan direction.
*ENG [-512 to 512 / 0 / 1 dot/step]
*ENG [-15 to 15 / 0 / 1 pulse/step]
*ENG [-512 to 512 / 0 / 1 dot/step]
*ENG [-15 to 15 / 0 / 1 pulse/step]
*ENG [-512 to 512 / 0 / 1 dot/step]
*ENG [-15 to 15 / 0 / 1 pulse/step]
*ENG
[-512 to 512 / 0 / 1 dot/step]
*ENG [-15 to 15 / 0 / 1 pulse/step]
*ENG [-512 to 512 / 0 / 1 dot/step]
*ENG
[-15 to 15 / 0 / 1 pulse/step]
*ENG [-512 to 512 / 0 / 1 dot/step]
*ENG [-15 to 15 / 0 / 1 pulse/step]
5-58 SM