Ricoh G133 Service Manual page 445

Adjusts the size correction coefficient for the paper transfer roller current for
each paper size. SP2711 and SP2712 are multiplied by these SP values.
Paper Transfer: 1st Side:
001
S1
Paper Transfer: 1st Side:
002
S2
Paper Transfer: 1st Side:
003
S3
Paper Transfer: 1st Side:
004
S4
Paper Transfer: 1st Side:
005
S5
[Thick 6: Leading Edge Correction] Thick 6 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading
2714
edge in each mode. SP2711 and SP2712 are multiplied by these SP values.
The paper leading edge area can be adjusted with SP2715.
001 Paper Transfer: 1st Side
002 Separation DC: 1st Page
[Thick 6: L Edge: Timing]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2715
plate at the paper leading edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side
SM
[100 to 600 / 100 / 5%/step]
*ENG
S1 size ≥ 297 mm (Paper width)
[100 to 600 / 140 / 5%/step]
*ENG 297 mm ≥ S2 size ≥ 275 mm (Paper
width)
[100 to 600 / 200 / 5%/step]
*ENG 275 mm ≥ S3 size ≥ 210 mm (Paper
width)
[100 to 600 / 260 / 5%/step]
*ENG 210 mm ≥ S4 size ≥ 148 mm (Paper
width)
[100 to 600 / 330 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 30 / 0 / 1 mm/step]
5-123
Service Mode Table
G133