4. Replacement and Adjustment
Duplex Unit
Duplex Unit Removal
1. Open the front door and pull out the duplex unit.
2. Remove the slide rail roller on the left [A] and on the right [B].
3. Lift out the duplex unit [C].
Re-installation
To re-install the duplex unit'
1. Insert the duplex unit partially, only until it enters the black guide rail, and then re-attach each slide
rail roller.
2. Next, push the duplex unit into the machine completely. This method prevents interference from the
guide plate.
Adjustments
Duplex Unit Side-to-Side Adjustment
1. Remove the duplex unit front cover screws [A].
2. Pull the cover away partially, disconnect the LED sensor connector [B], and then remove the cover.
746