Ricoh G133 Service Manual page 402

Service Mode Table
Plain: 205 mm/sec, Fine: 77 mm/sec
The paper leading edge area can be adjusted with SP2422.
Paper Transfer: Plain: 1st
001
Side
Paper Transfer: Plain:
002
2nd Side
Paper Transfer: FINE: 1st
003
Side
Paper Transfer: FINE:
004
2nd Side
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2401 is multiplied by these SPs values.
2421
The paper leading edge area can be adjusted with SP2422.
Separation DC: Plain: 1st
005
Page
Separation DC: Plain:
006
2nd Page
Separation DC: Fine: 1st
007
Page
Separation DC: Fine
008
2nd Page
[Plain: L Edge: Timing]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2422
plate at the paper leading edge between the erase margin area and the image
area.
Plain: 205 mm/sec, Fine: 77 mm/sec
G133
*ENG
[0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 150 / 5%/step]
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
5-80 SM