Hdd Fan; When Installing The Hdd Fan; Hdd - Ricoh G133 Service Manual

Electrical Components
Keep NVRAMs away from any objects that can cause static electricity. Static
electricity can damage NVRAM data.
Make sure the NVRAM is correctly installed on the controller board.
Make sure that the DIP-switch settings on the old controller board are the same for
the new controller board. Do not change the DIP switches on the controller board
in the field.

3.13.12 HDD FAN

1. Controller unit (
2.

HDD (

"p.3-3 "HDD"")
3. HDD fan bracket [A] (
4. HDD fan [B] ( x 2)

When installing the HDD fan

Make sure that the HDD fan is installed with its decal facing the right side of the machine.
3.13.13 HDD
1. Controller unit (
G133
"p.3-3 "Controller Unit"")
x 2, x 1)
"p.3-3 "Controller Unit"")
3-112 SM