Ricoh G133 Service Manual page 280

SC Table
No. Type
1.
- - 2.
3.
No. Type
CTL Self-diagnostic error: NIB
823
B [XXXX]: Detailed error code
MAC address check sum error
[6101] The result of the MAC address check sum does not match the check
sum stored in ROM.
PHY IC error
[6104]
The PHY IC on the controller cannot be correctly recognized.
PHY IC loop-back error
[6105] An error occurred during the loop-back test for the PHY IC on the
controller.
- 1.
No. Type
[1401]
Self-diagnosis error: Standard NVRAM
The controller cannot recognize the standard NVRAM installed or
detects that the NVRAM is defective.
CTL
824
D
1.
2.
G133
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Defective controller
Check that the HDD is correctly connected to the controller.
Replace the HDD.
Replace the controller.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Replace the controller.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Loose connection
Defective standard NVRAM
Defective controller
Check the standard NVRAM is firmly inserted into the socket.
Replace the NVRAM.
4-64 SM