Ricoh G133 Service Manual page 288

SC Table
No. Type
HDD mail transfer error
An error is detected in the HDD at machine initialization.
CTL
873
B
1.
2.
No. Type
Delete All error 1: HDD
An error is detected while all of the HDD or NVRAM are formatted
physically by the Data Overwrite Security Unit (G874).
CTL
874
D
1.
2.
No. Type
Delete All error 2: Data area
An error is detected while all of the HDD or NVRAM are formatted
CTL
logically by the Data Overwrite Security Unit (G874).
875
D
Turn the main switch off/on and try the operation again
No. Type
CTL Log Data Error
876
D An error was detected in the handling of the log data at power on or
G133
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Defective HDD
Power failure during an access to the HDD
Initialize the HDD partition (SP5-832-008).
Replace the HDD.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Data Overwrite Security Unit (SD card) not installed
Defective HDD
Install the Data Overwrite Security Unit (G874).
Replace the HDD.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
The logical format for the HDD fails.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
4-72 SM