Ricoh G133 Service Manual page 512

Service Mode Table
004 Relative Humidity Range
005 Absolute Humidity Range
[Non-use Time Process Control Setting]
Adjusts the threshold for the process control at stand-by.
3531
When the current condition has changed by more than the values of these SPs
when compared with the conditions at the previous operation, the process
control at stand-by is executed.
001 Non-use Time Setting
002 Temperature Range
003 Relative Humidity Range
004 Absolute Humidity Range
Maximum Execution
005
Number
3611 [Development Gamma: Display/Set]
001 Bk (Current)
002 M (Current)
003 C (Current)
004 Y (Current)
005 Bk (Target Display)
006 M (Target Display)
007 C (Target Display)
008 Y (Target Display)
G133
*ENG [0 to 99 / 50 / 1 %RH/step]
*ENG [0 to 99 / 6 / 1 g/m
*ENG
[0 to 1440 / 360 / 1 minute/step]
*ENG
[0 to 99 / 10 / 1°C/step]
*ENG [0 to 99 / 50 / 1 %RH/step]
*ENG [0 to 99 / 6 / 1 g/m
Adjusts the maximum execution time for
*ENG the process control at stand-by.
[0 to 99 / 10 / 1 time/step]
*ENG
Displays the current development
*ENG
gamma for each color.
*ENG
[0 to 5 / - / 0.01 mg/cm
*ENG
*ENG Displays the target development gamma
for each color.
*ENG
[0 to 5 / 0.85 / 0.01 mg/cm
*ENG [0 to 5 / 0.8 / 0.01 mg/cm
*ENG
[0 to 5 / 0.77 / 0.01 mg/cm
5-190
3
/step]
3
/step]
2
/kV /step]
2
/kV /step]
2
/kV /step]
2
/kV /step]
SM