Ricoh G133 Service Manual page 513

009 Bk (Standard Target Set)
010 M (Standard Target Set)
011 C (Standard Target Set)
012 Y (Standard Target Set)
013 Environmental Correction
[Vk Display]
3612
Displays Vk for each color.
001 Bk
002 M
003 C
004 Y
[Development DC Control: Display]
Plain: 205 mm/sec, Thick 1: 115 mm/sec, Thick 2 & FINE: 77 mm/sec
3621
Displays the development DC bias adjusted with the process control for each
line speed and color.
001 Plain: Bk
002 Plain: M
003 Plain: C
004 Plain: Y
SM
Displays the standard target
*ENG development gamma for each color.
[0 to 5 / 0.9 / 0.01 mg/cm
*ENG
[0 to 5 / 0.8 / 0.01 mg/cm
*ENG
*ENG
Turns on or off the environmental
correction for target development
*ENG gamma.
[0 or 1 / 1 / - ]
0: Not Correct, 1: Correct
*ENG
*ENG
[-300 to 300 / - / 1 V/step]
*ENG
*ENG
*ENG
*ENG
[0 to 700 / 550 / 1 -V/step]
*ENG
*ENG
5-191
Service Mode Table
2
/kV /step]
2
/kV /step]
G133