Ricoh G133 Service Manual page 434

Service Mode Table
S4
Paper Transfer: 1st Side:
005
S5
Paper Transfer: 2nd Side:
006
S1
Paper Transfer: 2nd Side:
007
S2
Paper Transfer: 2nd Side:
008
S3
Paper Transfer: 2nd Side:
009
S4
Paper Transfer: 2nd Side:
010
S5
[Thick 3: Leading Edge Correction] Thick 3 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading
2654
edge in each mode. SP2651 and SP2652 are multiplied by these SP values.
The paper leading edge area can be adjusted with SP2655.
001 Paper Transfer: 1st Side
002 Separation DC: 1st Page
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2650 is multiplied by these SP values.
2654
The paper leading edge area can be adjusted with SP2655.
G133
210 mm ≥ S4 size ≥ 148 mm (Paper
width)
[100 to 600 / 330 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
[100 to 600 / 100 / 5%/step]
*ENG
S1 size ≥ 297 mm (Paper width)
[100 to 600 / 160 / 5%/step]
*ENG 297 mm ≥ S2 size ≥ 275 mm (Paper
width)
[100 to 600 / 260 / 5%/step]
*ENG 275 mm ≥ S3 size ≥ 210 mm (Paper
width)
[100 to 600 / 430 / 5%/step]
*ENG 210 mm ≥ S4 size ≥ 148 mm (Paper
width)
[100 to 600 / 600 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
5-112 SM