Ricoh G133 Service Manual page 47

Meter Click
Charge: SP5-930-010
PCU
Meter Click
Charge:
Image SP5-930-014
Transfer Belt
Unit
Meter Click
Charge: SP5-930-016
Fusing Unit
Counter
SP5-045-001
method
A3/DLT
SP5-104-001
double count
Service Tel:
SP5-812-001
Telephone
and -002
/Facsimili
SM
The counter menu does
not show.
Enables or disables the PM alert for
the PCUs.
If this SP is enabled, an alert
message is displayed when the
PCUs need to be replaced.
Enables or disables the PM alert for
the image transfer belt unit.
If this SP is enabled, an alert
message is displayed when the
image transfer belt unit needs to be
replaced.
Enables or disables the PM alert for
the fusing unit.
If this SP is enabled, an alert
message is displayed when the
fusing unit needs to be replaced.
Specifies if the counting method
used in meter charge mode is
based on developments or prints.
NOTE: You can set this one time
only. You cannot change the setting
after you have set it for the first
time.
Specifies whether the counter is
doubled for A3/DLT paper.
-001: shows or sets the telephone
number of the service
representative.
-002: shows or sets the fax number
of the service station. The number
1-17
Printer Installation
"1": No alert
"1": No alert
"1": No alert
"1": Prints
"0": Single
counting
-
G133