Cleaning For Id Sensors - Ricoh G133 Service Manual

2. Open the right door.
3. Fusing unit ( "p.3-3 "Fusing Unit"")
4. Image transfer belt unit (
5. ID sensor unit [A] (
6. ID sensor board [B] (

Cleaning for ID sensors

ID sensors must be cleaned when you visit the customer to service the machine. Do the
following steps for ID sensor cleaning.
1. K PCU ( "p.3-3 "PCU"")
2. Fusing unit ( "p.3-3 "Fusing Unit"")
3. Image transfer belt unit (
4. Slide the ID sensor shutter [A] to the left side.
5. Clean the ID sensors keeping the ID sensor shutter to the left.
SM
"p.3-3 "Image Transfer Belt Unit"")
x 2, x 2, x 1)
x 6)
"p.3-3 "Image Transfer Belt Unit"")
3-45
Paper Transfer
G133