Ricoh G133 Service Manual page 430

Service Mode Table
004 Paper Transfer: S4
005 Paper Transfer: S5
[OHP: Leading Edge Correction] OHP: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading
2621
edge in each mode. SP2603 and SP2608 are multiplied by these SP values.
The paper leading edge area can be adjusted with SP2622.
001 Paper Transfer
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2601 is multiplied by these SP values.
2621
The paper leading edge area can be adjusted with SP2622.
002 Separation DC
[OHP: L Edge: Timing]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2622
plate at the paper leading edge between the erase margin area and the image
area.
001 Paper Transfer
002 Separation DC
[OHP: Trailing Edge Correction] OHP: Trailing Edge Correction
2623
Adjusts the correction to the paper transfer roller current for the paper trailing
G133
width)
[100 to 600 / 260 / 5%/step]
*ENG 210 mm ≥ S4 size ≥ 148 mm (Paper
width)
[100 to 600 / 330 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
[0 to 30 / 0 / 1 mm/step]
*ENG
5-108 SM