Ricoh G133 Service Manual page 363

Adjusts the time of the polygon motor rotation. DFU
001 Warming-Up
002 Job End
[Image Parameter]
2107
DFU
001 Image Gamma Flag
002 Shading Correction Flag
[Test Pattern]
2109
Generates the test pattern using "COPY Window" tab in the LCD.
003 Pattern Selection
SM
*ENG
[0 to 60 / 10 / 1 sec/step]
*ENG
*ENG
[0 or 1 / 1 / 1 /step]
*ENG
[0 or 1 / 1 / 1 /step]
[0 to 23 / 0 / 1/step]
0 None
1: 1-dot line pattern (Vertical)
2: 2-dot line pattern (Vertical)
3: 1-dot line pattern (Horizontal)
4: 2-dot line pattern (Horizontal)
5: 1-dot grid pattern (Vertical)
6: 1-dot grid pattern (Horizontal)
7: 1-dot grid pattern (Fine)
8: 1-dot grid pattern (Rough)
-
9: 1-dot slant pattern (Fine)
10: 1-dot slant pattern (Rough)
11. 1-dot pattern
12. 2-dot pattern
13. 4-dot pattern
14. 1-dot trimming pattern
15: Cross stitch: sub-scan
16: Cross stitch: main-scan
17: Belt pattern (Horizontal)
18: Belt pattern (Vertical)
5-41
Service Mode Table
G133