Ricoh G133 Service Manual page 354

Service Mode Table
BK
Adjusts the CPM for middle thick paper in B/W mode. This setting is activated
only when the machine enters the CPM down mode. For details, refer to "CPM
Down System" in the "Detailed Section Descriptions" section.
CPM Value: M-Thick:
FC
022
Adjusts the CPM for middle thick paper in full color mode. This setting is
activated only when the machine enters the CPM down mode. For details,
refer to "CPM Down System" in the "Detailed Section Descriptions" section.
Operation Time
023
Specifies the time for keeping CPM down mode. This SP is activated only for
middle thick paper in full color mode.
Low Temp.: CPM O/V
Coeffiecient
024 Specifies the offset value for CPM down mode. This SP is activated only when
the machine determines that input voltage is 93% or less (SP1-916-026) and
ambient temperature is 17°C or less (SP1-112-001) using middle thick paper in
full color mode.
CPM Down Enable
025
Enables or disables the CPM down mode.
Voltage Target
026
Specifies the threshold voltage for CPM down mode.
1917 [Magnetic Field Roller HP Detection]
Temp.: BW: M
001
Specifies the limit times of the ferrite roller rotation for initializing the home
G133
*ENG [20 to 30 / 30 / 5 cpm/step]
*ENG [0 to 60 / 20 / 1 sec/step]
*ENG
[0 to 10 / 5 / 5 cpm/step]
[0 or 1 / 1 / - ]
*ENG
0: OFF, 1: ON
[80 to 120 / 93* / 1%/step]
*ENG
*Only TAIWAN: 90
*ENG
[5 to 100 / 40 / 1 time/step]
5-32 SM