Ricoh G133 Service Manual page 427

Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
plate at the paper trailing edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
[Thick 2: LL] Thick 2 Paper: LL Environment Coefficient Adjustment
2581
Adjusts the environment coefficient for each mode. When the environment is
detected as LL, SP2553 and SP2558 are multiplied by these SP values.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
Adjusts the environment coefficient for each mode. When the environment is
2581
detected as LL, SP2551 is multiplied by these SP values.
003 Separation DC: 1st Side
004 Separation DC: 2nd Side:
[Thick 2: ML] Thick 2 Paper: ML Environment Coefficient Adjustment
2582
Adjusts the environment coefficient for each mode. When the environment is
detected as ML, SP2553 and SP2558 are multiplied by these SP values.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
Adjusts the environment coefficient for each mode. When the environment is
2582
detected as ML, SP2551 is multiplied by these SP values.
003 Separation DC: 1st Page
004 Separation DC: 2nd Page
SM
*ENG
[–100 to 0 / 0 / 1 mm/step]
*ENG
*ENG
[10 to 250 / 80 / 5%/step]
*ENG
*ENG [10 to 250 / 180 / 5%/step]
*ENG [10 to 250 / 240 / 5%/step]
*ENG
[10 to 250 / 90 / 5%/step]
*ENG
*ENG [10 to 250 / 140 / 5%/step]
*ENG [10 to 250 / 240 / 5%/step]
5-105
Service Mode Table
G133