Ricoh G133 Service Manual page 466

Service Mode Table
Paper Transfer: FINE: 2nd Side:
020
S5
[Special 3: Leading Edge Correction] Special 3 Paper: Leading Edge
Correction
Adjusts the correction to the paper transfer roller current at the paper leading
2871
edge in each mode. SP2852 and SP2857 are multiplied by these SP values.
Plain: 205 mm/sec, Thick 2&Fine: 77 mm/sec
The paper leading edge area can be adjusted with SP2872.
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: FINE: 1st Side
004 Paper Transfer: FINE: 2nd Side
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2851 is multiplied by these SP values.
005-008
The paper leading edge area can be adjusted with SP2872.
005 Separation DC: Plain: 1st Page
006 Separation DC: Plain: 2nd Page
007 Separation DC: Fine: 1st Page
008 Separation DC: Fine: 2nd Page
[Special 3: L Edge: Timing]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2872
plate at the paper leading edge between the erase margin area and the image
area.
Plain: 205 mm/sec, Thick 2&Fine: 77 mm/sec
G133
width)
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 150 / 5%/step]
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
5-144 SM