Ricoh G133 Service Manual page 420

Service Mode Table
The paper trailing edge area can be adjusted with SP2524.
Paper Transfer: Thick 1: 1st
001
Side
Paper Transfer: Thick 1: 2nd
002
Side
003 Paper Transfer: FINE: 1st Side
004 Paper Transfer: FINE: 2nd Side
[Thick 1: T Edge:Timing]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2524
plate at the paper trailing edge between the erase margin area and the image
area.
Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
Paper Transfer: Thick 1: 1st
001
Side
Paper Transfer: Thick 1: 2nd
002
Side
003 Paper Transfer: FINE: 1st Side
004 Paper Transfer: FINE: 2nd Side
[Thick 1: LL] Thick 1 Paper: LL Environment Coefficient Adjustment
Adjusts the environment coefficient for each mode. When the environment is
2531
detected as LL, SP2502 and SP2507 are multiplied by these SP values.
Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
Paper Transfer: Thick 1: 1st
001
Side
002 Paper Transfer: Thick 1: 2nd
G133
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[–100 to 0 / 0 / 1 mm/step]
*ENG
*ENG
[–100 to 0 / 0 / 1 mm/step]
*ENG
*ENG
[10 to 250 / 80 / 5%/step]
*ENG
5-98 SM