Fusing
in diameter, and approximately 0.1 g in weight) to the rear shaft of the fusing roller at 2
- 3 mm from the edge [B] (rear side of the fusing roller).
And:
Follow the points 3 and 4 explained in "When re-installing the pressure roller" (
"Pressure Roller and Pressure Roller Bearing"")
3.10.8 LUBRICANT ROLLER BUSHING
1.
Fusing unit (
"p.3-3 "Fusing Unit"")
2.
Fusing right cover (
3.
Lubricant roller unit [A] (
4.
Lubricant roller bushings [B] (spring x 1 each)
3.10.9 LUBRICANT ROLLER AND CLEANING ROLLER
1.
Fusing unit (
"p.3-3 "Fusing Unit"")
2.
Fusing right cover (
3.
Lubricant roller bushings (
G133
"p.3-3 "Fusing Lamp"")
x 2)
"p.3-3 "Fusing Lamp"")
"p.3-3 "Lubricant Roller Bushing"")
3-80
"p.3-3
SM