Ricoh G133 Service Manual page 473

2914 [Shutter Motor]
001 Delay Time Open
002 Delay Time Close
003 Shutter Open
004 Shutter Close
[SecondaryFB: Threshold] Paper Transfer Roller Feed-back: Threshold
Adjustment
2930
Adjusts the threshold between high resistance (division 1) and low resistance
(division 2) at the paper transfer roller. This SP affects SP2931 to SP2939.
001 Voltage
[SecondaryFB: Plain]
2931
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for plain paper use in full color mode.
001 Limit Voltage: Division 1
002 Limit Voltage: Division 2
[SecondaryFB: Thin]
2932
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for thin paper use in full color mode.
001 Limit Voltage: Division 1
002 Limit Voltage: Division 2
SM
*ENG
DFU
[1 to 50 / 38 / 1 ms/step]
*ENG
Opens the shutter on the laser optics
*ENG
housing unit manually for test purposes.
Closes the shutter on the laser optics
*ENG
housing unit manually for test purposes.
*ENG [0 to 7000 / 5000 / 10 –V/step]
*ENG [0 to 7000 / 6000 / 10 –V/step]
*ENG [0 to 7000 / 5000 / 10 –V/step]
*ENG
[0 to 7000 / 6000 / 10 –V/step]
*ENG [0 to 7000 / 5000 / 10 –V/step]
5-151
Service Mode Table
G133