Ricoh G133 Service Manual page 67

7. Attach the rear joint bracket [E] (
8. Attach the front joint bracket [F] and the holder bracket [G] (
Holder bracket [G] must be placed outside the front joint bracket [F]. This
bracket is provided with the Bridge Unit (B227).
9. Pull the lock lever [H] (
10. Slowly push the finisher to the left side of the machine keeping its front door open until
the brackets [E] [F] go into their slots.
11. Push the lock lever [H], and then secure it (
12. Close the front door of the finisher.
13. Connect the finisher connector [I] to the machine.
SM
x 2; M4 x 14).
x 1).
x 1).
1-37
3000-Sheet Finisher (B805)
x 2; M4 x 14).
G133