Ricoh G133 Service Manual page 411

[Thin: L Edge: Timing]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2472
plate at the paper leading edge between the erase margin area and the image
area.
Plain: 205 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: FINE: 1st Side
004 Paper Transfer: FINE: 2nd Side
005 Separation DC: Plain: 1st Page
Separation DC: Plain: 2nd
006
Page
007 Separation DC: Fine: 1st Page
008 Separation DC: Fine: 2nd Page
[Thin: Trailing Edge Correction] Thin Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode. SP2453 and SP2457 are multiplied by these
2473
SP values.
Plain: 205 mm/sec, Fine: 77 mm/sec
The paper trailing edge area can be adjusted with SP2474.
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: FINE: 1st Side
004 Paper Transfer: FINE: 2nd Side
SM
*ENG
[0 to 30 / 0 / 2 mm/step]
*ENG
*ENG
[0 to 30 / 0 / 2 mm/step]
*ENG
*ENG
[0 to 30 / 0 / 2 mm/step]
*ENG
*ENG
[0 to 30 / 0 / 2 mm/step]
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
5-89
Service Mode Table
G133