Ricoh G133 Service Manual page 601

These SPs count the number of jobs broken down by the number of pages
in the job, regardless of which application was used.
P:Jobs/PGS
8 074
These SPs count and calculate the number of print jobs by size based on
the number of pages in the job.
O:Jobs/PGS
These SPs count and calculate the number of "Other" application jobs
8 077
(Web Image Monitor, Palm 2, etc.) by size based on the number of pages
in the job.
8 07x 1 1 Page
8 07x 2 2 Pages
8 07x 3 3 Pages
8 07x 4 4 Pages
8 07x 5 5 Pages
8 07x 6 6 to 10 Pages
8 07x 7 11 to 20 Pages
For example: When a copy job stored on the document server is printed in document
server mode, the appropriate L: counter (SP8076 0xx) increments.
Printing a fax report counts as a job and increments the F: counter (SP 8073).
Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.
If a job is paused and re-started, it counts as one job.
If the finisher runs out of staples during a print and staple job, then the job is counted at
the time the error occurs.
For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying
the number of sets of copies by the number of pages scanned. (One duplex page
counts as 2.)
The first test print and subsequent test prints to adjust settings are added to the
number of pages of the copy job (SP 8072).
When printing the first page of a job from within the document server screen, the page
SM
*CTL
[0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
8 07x 8 21 to 50 Pages
8 07x 9 51 to 100 Pages
8 07x 10 101 to 300 Pages
8 07x 11 301 to 500 Pages
8 07x 12 501 to 700 Pages
8 07x 13 701 to 1000 Pages
8 07x 14 1001 to Pages
5-279
Service Mode Table
G133