D-Link xStack DGS-3620 Series Reference Manual page 248

DGS-3620 m/ mSW Rls. 1.02.000
Switch#show ip mroute 239.0.0.5 20.2.2.10
(20.2.2.10, 239.0.0.5), 00:02:53/00:00:37, Flags: VP
Incoming interface: VLAN20, RPF neighbor: 2.3.0.1
Outgoing interface List: NULL
Total Entries: 1
Switch#show ip mroute static
Mroute: 10.0.0.0/8, RPF neighbor: 11.1.1.1
Mroute: 11.0.0.0/8, RPF neighbor: NULL
Total Entries
Field
D - Dense
S - Sparse
s - SSM Group
V - DVMRP
F - Register Flag
P - Pruned
R (S, G) RPT-bit set
T – SPT-bit set
W - Assert winner
(172.18.16.1, 235.0.0.0)
Uptime/Expire
RPF neighbor
CLI Reference Guide
The following example displays IP multicast routing information for group source
part (239.0.0.5, 20.2.2.10).
The following example displays the multicast static routes created on the system.
: 2
Description
The entry is operating in PIM-DM mode.
The entry is operating in PIM-SM mode.
The entry is a member of an SSM group.
The entry is operating in DVMRP mode.
Status of whether the software is registering for a multicast source.
Route has been pruned. This information indicates that this switch has
no outgoing for this group.
Specify this switch is the RPT upstream for this group, and this group is
forwarding in SPT. The downstream switch has sent (S, G) prune
message to this switch.
Status of whether the packets have been received on the shortest-path
tree.
Assert winnerSpecify this outgoing is in assert state, and it is a assert
winner.
The source address and group address for this entry.
The uptime and expire time for this entry.
The RPF neighbor address for the specified network address, as
specified by command "ip mroute".
show ip mroute
238