DGS-3620 m/ mSW Rls. 1.02.000
14-16 set metric
set metric NUMBER
no set metric
Syntax Description
NUMBER
Default
Command Mode
Usage Guideline
Examples
Switch# configure terminal
Switch(config)# route-map mapmetric permit 10
Switch(config-route-map)# set metric 100
Switch(config-route-map)#
CLI Reference Guide
Use this command to add a set command to modify the metric of routes. Use the
no form of this command to delete this command.
Specifies the metric of routes.
The range is 0 to 4294967294.
None
Route map configuration mode
Use this command to modify the metric of routes to be redistributed.
You can verify your settings by entering the show route-map command.
To add a set command to modify the metric of routes:
set metric
457